CHAPTER 3: Replacing notebook components
Replacing the speakers
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver | or |
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
5 black M2×3 (keyboard frame - top base side) - Indicated by A in step 8 of the “Replacing the keyboard” procedure on page 53
•
13 black M2.5×6 (keyboard frame/palm rest module - base side) - indicated by B in step 8 of the “Replacing the keyboard” procedure on page 53
• | 4 black M2×3 (speakers) |
To replace the speakers:
1Complete the steps in “Preparing the notebook” on page 37.
2Remove the hard drive by performing steps 3 and 4 of the “Replacing the hard drive” procedure on page 41.
3Remove the optical drive by performing steps 3 and 4 of the “Replacing the optical drive” procedure on page 46.
4Remove the palm rest by performing steps 8 – 13 of the “Replacing the palm rest module” procedure on page 48.
5Remove the keyboard by performing steps 10 – 14 of the “Replacing the keyboard” procedure on page 53..
Caution
The keyboard is connected to the notebook through a keyboard cable. Disconnect this cable first before pulling the keyboard away from the palm rest assembly.
6Lay the keyboard frame keys down.
58
