www.packardbell.com
5If your new optical drive already has it’s own bracket and bezel, go to step 10.
If you need to use the bezel and bracket from the old optical drive, perform steps 6 – 9 as necessary.
6Detach the bezel from the old optical drive.
7Remove the screw that secures the optical drive bracket, and then detach the bracket from the drive.
8Attach the bezel to the new optical drive.
9Attach the bracket to the new optical drive and secure it with the screw removed in step 7.
10Slide the new optical drive into the drive bay and make sure it’s properly engaged to the ODD1 connector.
11Secure the new drive to the system board with the screw removed in step 3.
12Reinstall the battery.
47
