
Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the keyboard” procedure on page 53.
Reinstall the USB board by performing steps 8 – 9 of the “Replacing the USB board” procedure on page 63.
Reinstall the Bluetooth module by performing step 7 of the “Replacing the Bluetooth module” procedure on page 65.
Reconnect the LCD, USB board and Bluetooth module cables to their system board connectors.
Reinstall the system board by performing steps 19 and 20 of the “Replacing the system board” procedure on page 67.
Reinstall the cooling assembly by performing steps 10 – 11 of the “Replacing the cooling assembly” procedure on page 70.
Apply just enough thermal grease to evenly coat the surface of the processor die.
Use a flat-blade screwdriver to turn the lock screw 180° clockwise to secure the processor in place.
8
9
10
11
12
13
14
15
16 Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing the palm rest module” procedure on page 48.
7 Align pin 1 of the new processor (indicated by the gold arrow on the corner of the processor) with the beveled corner of the processor socket.
The processor will easily fit into the socket if you oriented it properly.
CHAPTER 3: Replacing notebook components
5Use a
6Remove the old processor from the system board (2).
74