Section 521 Built-In ACD Supervisor Guide
10 DBS 576 (USA) issued October 2000 576-3.6-521 (ACD 4.0)
5. Repeat steps 1 to 4 to set insertion of other program lines, and end
programming at the END/DISC line.
Note:
• If you press soft key 10 and select List at any of the above steps, the List
Mode screen is redisplayed.
• The END/DISC line cannot be changed nor deleted.
DELETE (FF3)
This command deletes the current setting of displayed program lines.
Deletion can be repeated up to 19 lines.
The following screen display shows an example of deletion of line 01.
1. Confirm the specified line to be deleted, and press the HOLD
key.
Example: Line 01 is deleted.
2. The program line that was displayed is deleted, and the List Mode
screen is redisplayed.
When the specified line is deleted, each subsequent program line
is shifted up.
Note:
Note: If you press soft key 10 and select List at any of the above steps, the
List Mode screen is redisplayed.
SEARCH 1,015,010
01:DELETE(LINE)
To Delete Program
Data, Press
HOLD Key. List→
PLAY 7,1
01:Select FFKey
SEARCH 1,020,010
RET 02,010
PLAY 9,0
END/DISC