85
VQT1R87
Advanced (Playback)
Press
3
/
4
to set the number of prints, and then p res s [MENU/SET] to set.
•When [MULTI] has been s elected, repeat steps 3 and 4 for each picture. (It is not
possible to use the same setting for a multiple number of pictures.)
Press [‚] to return to the m enu screen.
•Press [MENU/SET] to close the menu.
∫Canceling all the [DPOF PRINT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2Press 3 to select [YES] an d then press [MENU/SET].
3Press [MENU/SET ] to close the men u.
•You cannot select [CANCEL] if not even one picture has been set for DPOF printin g.
∫To print the date
After setting the number of prints, set/cancel printin g with the recording date by pressing
[DISPLAY].
•When you go to a photo printing st or e for digital printing, be sure to ord er the printing of the
date additionally if requir ed.
•Depending on the photo prin ting store or the printer, the date may not be printed even if you set
to print the date. For further i nf ormation, ask at your photo pri nt ing store or refer to the
operating instructions fo r the printer.
•The date cannot be printed on pi ct ur es stamped with text.
Note
•The number of prints can be set fro m 0 to 999.
•With a printer supporting PictBridge, the date print settings of the printer may take precedence
so check if this is the case.
•It may not be p ossible to us e t h e DPOF print s ettings with ot h er equipment . In this case, c a ncel
all the settings, a nd reset the settin gs.
•If the file is not based on the DCF standard, the DPOF print set tin g ca nno t be set.
You can set protection f or pictures you do not want to be del eted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P18)
Select the picture, and then press
[MENU/SET].
[SINGLE] [MULTI]
Press 2/1 to
select the picture. Press 3/4/2/1
to select the
pictures.
P [PROTECT]
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
3
4
5
1
2
VQT1R87.book 85 ページ ２００８年６月２６日 木曜日 午前９時３５分