VQT1R87
88
Connecting to other equipment
Connecting to other equipment
Connecting to a PCYou can acquire recorded pictures to a PC by connecting the camera and the PC.
•You can easily print out or mail the pictures y ou have imported. U se of the
“PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenie nt
way of doing this.
•Read the separate operating in st ru ctions for the supplied softw are for more information abou t
the software in the CD-ROM (sup plied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable A
(supplied).
•Do not use any other USB connect i on c ables except the supplied one .
Use of cables other than the supp l i ed U SB connection cable may cause ma l fu nction.
AUSB connection cable (sup pl i ed )
•Check the directions of the conn ectors, and plug them straig ht in or unplug them straight out.
(Otherwise the connectors m ay be bent out of shape which will caus e t rouble.)
BAlign the marks, and insert.
CAC adaptor (DMW-AC5PP; opt i onal)
•Use a battery with sufficient bat tery power or the AC adaptor (DMW- AC5PP; optional). If the
remaining battery power becomes low while the came ra and the PC are commun i cating, the
status indicator blinks and the ala rm beeps.
Refer to “Disconnecting the USB connection cable sa fely” (P89) before disconnect ing the USB
connection cable. Otherwise , da ta may be destroyed.
Press 3/4 to select [PC], and then press [MENU/
SET].
•If [USBMODE] (P22) is set to [PC] in the [SETUP] menu in
advance, the camera will be automatically connected to the PC
without displaying the [USB MODE] selectio n screen. Since there
is no need to set this each time you c onn ect to the PC, it is
convenient.
•When the camera has been conn ec ted to the PC with
[USB MODE] set to [PictBridge(PTP)], a message may appear
on the PC’s scre en . S el e c t [Cancel] to close the screen, and
disconnect the camera from t he PC. Then set [USB MODE] to
[PC] again.
1
DC IN
AV OUT/
DIGITAL
COMPONENT
OUT
2
USB MODE
SELECT SET
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
MENU
VQT1R87.book 88 ページ 2008年6月26日 木曜日 午前9時35分