Premier Mounts CDM-600 specifications 7 ODU, Fast SET, Fast View

CDM-600 Satellite Modem	Revision 7
Front Panel Operation	MN/CDM600.IOM

6.3.7ODU

This permits the CDM-600 to interface directly with a Comtech RF Transceiver (Outdoor Unit, or ODU. This is accomplished using a low-speed, half-duplex FSK link on the Rx IF port, with a carrier frequency around 2.7 MHz.

ODU CONTROL=DISABLE (DISABLE, ENABLE)

SYSTEM TYPE=STANDALONE (STANDALONE, 1:1)

6.3.8FAST

FAST OPTIONS: SET	VIEW
MOTHERBOARD S/N 123456789		HW REV 1.0

Select whether to change or view current settings using [←][→] arrow keys.

6.3.8.1FAST: SET

ENTER 20 CHAR CODE BELOW AND PRESS ENTER

XXXXXXXXXXXXXXXXXXXX

FAST is the way to enable new options in the modem. Obtain the FAST code for the new option from Comtech EF Data. Enter the code carefully. Use the [←][→] arrow keys to move the cursor to each character. Use the [↑] [↓] arrow keys to edit the character, then press ENTER. The modem will respond with “Configured Successfully” if the new FAST option has been accepted.

6.3.8.2FAST: VIEW

VIEW OPTIONS:	10 9	8 7 6 5 4 3 2 1
20 Mbps	INSTALLED

Use the [←][→] arrow keys to show which FAST options are currently installed.

6–42