Premier Mounts CDM-600 specifications Eid?, EID=abbbcdefgh, Hardware Bytes, Hrv?, HRV=xx.y

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments for		Response	Query
	(Instruction	Command or			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	Response to			Code and
				Command
	Qualifier)	Query			Qualifier)
Equipment ID	N/A	10 bytes	Query only.	N/A	EID?	EID=abbbcdefgh
			Unit returns the equipment identification and installed options			(see description of
			information, in the form abbbcdefgh; where:			arguments)
			a=Turbo codec
			0=None, 1=Lo-Rate Turbo, 2=Hi-Rate Turbo
			3=TPC/LDPC Codec to 5 Mbps
			4=TPC/LDPC Codec and FAST option to 10 Mbps
			5=TPC/LDPC Codec and FAST option to 20 Mbps
			bbb=defines the modem model number:
			600 is the CDM-600 (this case)
			601 is the CDM-600L
			602 is the CLM-9600L
			c=Data Rate Option:
			0=Base (to 5 Mbps), 1=to 10 Mbps, 2=to 20 Mbps.
			d=Higher-order modulation option:
			0=None, 1=8-PSK + 8-QAM, 2=16-QAM
			3=8-PSK+8-QAM and 16-QAM
			e=Framing option:
			0=None, 1=IBS, 2=IDR
			3=IBS and IDR
			4=IBS with high-rate ESC
			5=IBS with high-rate ESC and IDR
			f=Drop and Insert/Audio mode
			0=None, 1=D&I, 2=Audio, 3=D&I and Audio.
			g=Special Options:
			0=None, 1=Opt1, 2=Opt2, 3=Opt 1 and 2.
			h=High-Stability Reference module:
			0=None, 1=installed
			Example: EID=1600213300 = CDM-600, Low-Rate Turbo,
			8-PSK/IDR/IBS, Drop and Insert, Audio, up to 20 Mbps
Hardware	N/A	4 bytes	Query only.		HRV?	HRV=xx.y
Revision			Unit returns hardware revision level of both main circuit cards,			(see description of
			where xx indicates the main (bottom) card, and y indicates the			arguments)
			top (modem) card.
			For units manufactured before Feb 2005, y = 0
			For units manufactured after Feb 2005, y = 1
			(provides extended IF frequency range)

Notes: 1. To achieve LDPC to 20 Mbps, the unit will require the TPC/LDPC Codec, base modem data rate FAST option to 20 Mbps and the LDPC data rate FAST option to 20 Mbps.

2. D&I FAST option provides access to both Open Network D&I and Closed Network D&I++.

16–34