Premier Mounts CDM-600 specifications Opening Screen, Main Menu

CDM-600 Satellite Modem	Revision 7
Front Panel Operation	MN/CDM600.IOM

6.2Opening Screen

This screen is displayed whenever power is first applied to the unit:

COMTECH CDM-600	OPEN NETWORK	MODEM
TURBO: TPC/LDPC	S/W VER	2.0.1

For units manufacured after February 2005 with the extended IF bandwidth feature:

COMTECH CDM-600(E)	OPEN NETWORK	MODEM
TURBO: TPC/LDPC	S/W VER	2.0.1

Press any key to go to the Main Menu screen. (Note: a REF WARMING message may be seen at this point - see Section 6.3.1.8.)

6.3Main Menu

SELECT: CONFIGURATION TEST INFORMATION

MONITOR STORE/LOAD UTILITY ODU FAST

The following choices are presented:

CONFIGURATION	Permits the user to fully configure the modem.
TEST	Permits the user to configure the modem into one of several Test
	modes.
INFORMATION	Permits the user to view information on the modem, without
	having to go into the Configuration screens.
MONITOR	Permits the user to monitor the current status of the modem and
	view the log of stored events for the modem.
STORE/LOAD	Permits the user to store and retrieve up to 10 different modem
	configurations.
UTILITY	Permits the user to perform miscellaneous functions, such as
	setting the Real-Time Clock, adjusting the display brightness,
	etc.
ODU	Permits the user to monitor and control a Comtech EF Data RF
(Outdoor Unit)	Transceiver, if connected.
FAST	Permits the user to configure different options, for extended data
(Fully Accessible System	rates, interfaces, etc. Contact the factory for details.
Topology)

	The actual choices displayed in the sub-menus may vary according
	to which FAST options have been enabled. Where a FAST option
IMPORTANT	affects a menu, this is shown in the descriptive text.

6–5