Premier Mounts CDM-600 Trs= Trs?, Trs#, Tsi= Tsi?, Tsi#, Tsc= Tsc?, Tsc#, Tpl=, Tpl#

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments		Response	Query
	(Instruction	for Command			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	or Response			Code and
				Command
	Qualifier)	to Query			Qualifier)
Tx	TRS=	1 byte, value	Command or Query.	TRS=	TRS?	TRS=x
Reed-		of 0 thru 3	Tx RS encoding	TRS?		(see description of
Solomon			0=Normal (based on the Open Network framing mode	TRS*		arguments)
Encoding			selected)	TRS#
			1=IESS-310 mode, available all framing modes, except
			EDMAC.
			2=EF Data legacy standard (225,205) – unframed only
			3=IBS (126,112) – unframed only
			Example: TRS=0
			(This is a ‘don’t care’ if no RS is selected under FEC
			Type)
			Available all framing modes, except EDMAC.
Tx Spectrum	TSI=	1 byte, 0 or 1	Command or Query.	TSI=	TSI?	TSI=x
Invert			Tx Spectrum Invert selection, where:	TSI?		(see description of
			0=Normal	TSI*		arguments)
			1=Tx Spectrum Inverted	TSI#
			Example:TSI=0 (which is normal)
Tx Scrambler	TSC=	1 byte, 0 or 1	Command or Query.	TSC=	TSC?	TSC=x
			Tx Scrambler state, where:	TSC?		(see description of
			0=Off	TSC*		arguments)
			1=Normal	TSC#
			2=IESS-315 when in Turbo mode
			2=‘Special’ when uncoded or Viterbi (needs FAST
			Special opt 1)
			Example: TSC=1 (Scrambler On)
Tx Power	TPL=	4 bytes	Command or Query.	TPL=	TPL?	TPL=xx.x
Level			Tx Output power level between 0 and -20 dBm (minus	TPL?		(see description of
			sign assumed).	TPL*		arguments)
			Example: TPL=13.4	TPL#
			(Command not valid in AUPC mode)

16–10