Premier Mounts CDM-600 Tta= Tta?, Tta#, Dty= Dty?, Dty#, Ttc= Ttc?, =Ami Ttc, Ttc#

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments		Response	Query
	(Instruction	for Command			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	or Response			Code and
				Command
	Qualifier)	to Query			Qualifier)
Transmit	TTA=	1 byte, 0 or 1	Command or Query. (DROP mode parameter)	TTA=	TTA?	TTA=x
Terrestrial			Transmit terrestrial Alarm Mask conditions, where:	TTA?		(see description of
Alarm Mask			0=Alarm is active (unmasked).	TTA*		arguments)
			1=Alarm is masked.	TTA#
			Example: TTA=1 (masks an alarm).
Drop Type	DTY=	1 byte, value	Command or Query. (DROP/D&I++ mode parameter)	DTY=	DTY?	DTY=x
		of 0 thru 3	Drop Type where:	DTY?
			0=T1–D4	DTY*
			1=T1–ESF	DTY#
			2=E1–CCS
			3=E1–CAS
Tx Ternary	TTC=	1 byte, value	Command or Query. (G.703 Parameter)	TTC=	TTC?	TTC=x
Code		of 0 thru 3	Tx Ternary Code, where:	TTC?		(see description of
			0=AMI	TTC*		arguments)
			1=B8ZS	TTC#
			2=B6ZS
			3=HDB3
			Example: TTC=1 (selects B8ZS)
Transmit	TBA=	4 bytes,	Command or Query. (IDR Parameter)	TBA=	TBA?	TBA=xxxx
Backward		each a value		TBA?
Alarms		of 0 thru 2	Enable Transmit backward alarm enable:	TBA*		Position indicates
Enable			0=Disable	TBA#		backward alarm
			1=Enable Internal (S/W)			numbers: 1234
			2=Enable External (H/W)
			Example: TBA=0120
Transmit ESC	TET=	1 byte, 0 or 1	Command or Query. (IDR Parameter)	TET=	TET?	TET=x
Type			Sets or queries IDR ESC Type, where:	TET?
			0=64k data channel	TET*
			1=2 Audio channels	TET#

16–13