Premier Mounts CDM-600 specifications Ber?, Red?, Lrs= Lrs?, Lrs#, Swr?, Sno=, Sno?

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments for		Response	Query
	(Instruction	Command or			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	Response to			Code and
				Command
	Qualifier)	Query			Qualifier)
Rx BER	N/A	5 bytes	Query only.	N/A	BER?	BER=x
			Units returns the value of the estimated corrected BER			(see description
			in the form a.bx10-3. First three bytes are the value. Last			of arguments)
			two bytes are the exponent. Returns 99999 if the
			demodulator is unlocked or BER data is unavailable.
			Example: BER=4.8E3 (which is BER=4.8 x 10-3)
Redundancy	N/A	1 byte, 0 or 1	Query only.	N/A	RED?	RED=x
State			Unit returns the redundancy state of the unit, where			(see description
			0=Offline			of arguments)
			1=Online
			Example: RED=1 (which is Online)
Local/Remote	LRS=	1 byte, 0 or 1	Command or Query.	LRS=	LRS?	LRS=x
Status			Used set the user’s Local/Remote status, where:	LRS?
			0=Local	LRS*
			1=Remote	LRS#
			Example: LRS=1 (which is Remote)
Software	N/A	5 bytes	Query only.	N/A	SWR?	SWR=x.x.x
Revision			Unit returns the value of the internal software revision			(see description
			installed in the unit, in the form of x.x.x			of arguments)
			Example: SWR=1.0.3
Serial	SNO=	9 bytes	Query only.	N/A	SNO?	SNO=xxxxxxxxx
Number			Used to set or Query the units 9 digit serial number. Unit			(see description of
			returns its S/N in the form xxxxxxxxx.			arguments)
			Example: SNO=176500143

16–32