CDM-600 Satellite Modem Revision 7
Remote Control MN/CDM600.IOM
16–17
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Data
Rate
RDR= 9 bytes Command or Query.
Rx Data Rate, in kbps, between 2.4 kbps to 20 Mbps.
Resolution=1 bps
Example: RDR=02047.999.
For Hardware Version 2.0 or higher, and Firmware 1.3.1
or higher, additional auxiliary G.703 sub-rates are
available. These are selected using:
00512.AUX
01024.AUX
02048.AUX
The connectors used for the Aux rates are IDI/DDO.
These Aux rates are not available with D&I or IDR.
RDR=
RDR?
RDR*
RDR#
RDR? RDR=xxxxx.xxx
(see description of
arguments)
Priority System = RIT (Highest priority) , RFM, RFT, RMD, RCR, and RDR (Lowest Priority), indicated by shading. Any change to a higher priority parameter
can override any of the parameters of lower priority.
Exception: Select INSERT or D&I++ mode using RFM (Receive Framing type) which is highest priority