Premier Mounts CDM-600 specifications Dni= Dni?, Dni#, Dts= Dts?, Dts#

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments for		Response	Query
	(Instruction	Command or			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	Response to			Code and
				Command
	Qualifier)	Query			Qualifier)
Drop & Insert	DNI=	51 bytes	Command or query.	DNI=	DNI?	DNI=ddddddddddddd
			25 bytes of Drop information:	DNI?		dddddddddddtiiiiiiiiiii
			d = 24 bytes defining Timeslot locations	DNI*		iiiiiiiiiiiiiTL
			t = Drop type:	DNI#		(see description of
			(0=T1-D4, 1=T1-ESF, 2=E1-CCS, 3=E1-CAS) as DTY			arguments)
			25 bytes of Insert information:
			i = 24 bytes defining Timeslot location			Returns current D&I
			T = Insert type:			configuration
			(0=T1-D4, 1=T1-ESF, 2=E1-CCS, 3=E1-CAS) as ITY
			Timeslot definition:
			0 = Unused		DNI?n	Where n = 0 to 9
			1-9 for timeslots 1–9, A=10, B=11, C=12, D=13…V=31.			returns the DNI
						portion of 1 of 10
			L= Drop and Insert Internal Loop (0 = OFF, 1 = ON)			stored
			Example:			configurations
			123456789ABC0000000000003123456789ABC0000000000
			0031
			Drop channels 1–12 using timeslots 1–12, and unused
			channels 13–24. Same for Insert. E1-CAS, Drop and
			Insert directions. Internal Loop ON.
			If framing is D&I and data rate is 1920 kbps and DNI Type
			is E1-CCS or E1-CAS, then channels cannot be
			programmed (i.e. FIXED CHANNEL MODE).The DNI?
			Command will display all ‘x’ in the time-slot positions.
Drop	DTS=	3 bytes	Command or query.	DTS=	DTS?	DTS=yyyyyyyyyyyyy
Timeslot			(Note different format between command and query.)	DTS?		yyyyyyyyyyy
			Command format: DTS=xxy	DTS*		indicating all 24 Drop
				DTS#
			Where xx = Channel 01 through 24			timeslots values
			y = timeslot: 0-9, A=10, B=11, C=12, D=13,…V=31			associated with the
						24 Tx Satellite
						channels.

16–36