Premier Mounts CDM-600 Ctd= Ctd?, Ctd#, Tst= Tst?, Tst#, Msk= Msk?, Msk#

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments for		Response	Query
	(Instruction	Command or			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	Response to			Code and
				Command
	Qualifier)	Query			Qualifier)
Countdown	CTD=	3 bytes,	Command or query. (Hi-stab Ref parameter)	CTD=	CTD?	CTD=xxx
of Warm-up		numeric	Requires High-Stability Frequency Reference module to	CTD?		(see description of
Delay			be installed.	CTD*		arguments)
remaining			xxx = countdown of the number of seconds remaining of	CTD#
			the Warm-up time.
			As a command, the only permitted format is CTD=000,
			which abandons the delay.
			If Hi-Stability module is not installed, response to query
			is CTD*.
Unit Test	TST=	1 byte, value	Command or Query.	TST=	TST?	TST=x
Mode		of 0 thru 6	CDM-600 Test Mode, where:	TST?		(see description of
			0=Normal Mode (no test)	TST*		arguments)
			1=Tx CW	TST#
			2=Tx Alternating 1,0 Pattern
			3=IF Loopback
			4=RF Loopback
			5=Digital Loopback
			6=I/O Loopback
			Example: TST=3 (IF Loopback)
Unit Alarm	MSK=	6 bytes	Command or Query.	MSK=	MSK?	MSK=abcdef
Mask			Alarm mask conditions, in form abcdef, where:	MSK?		(see description of
			a=Tx AIS (0 = unmasked, 1 = masked)	MSK*		arguments)
			b=Rx AIS (0 = unmasked, 1 = masked)	MSK#
			c=bufferslip Alarm (0 = unmasked, 1 = masked)
			d=spare
			e=Rx AGC Alarm (0 = unmasked, 1 = masked)
			f=Eb/No Alarm (0 = unmasked, 1 = masked)
			Example: MSK=010110

16–24