Premier Mounts CDM-600 Rmd= Rmd?, =Bpsk Rmd, =Qpsk Rmd# =Oqpsk, Rcr= Rcr?, Rcr#

CDM-600 Satellite Modem							Revision 7
Remote Control							MN/CDM600.IOM
Parameter	Command	Arguments			Response	Query
	(Instruction	for Command				(Instruction
			Description of Arguments		to		Response to Query
Type	Code and	or Response				Code and
					Command
	Qualifier)	to Query				Qualifier)
Rx Demod	RMD=	1 byte, value	Command or Query.		RMD=	RMD?	RMD=x
Type		of 0 thru 5	Rx Demodulation, where:		RMD?		(see description of
			0=BPSK		RMD*		arguments)
			1=QPSK		RMD#
			2=OQPSK
			3=8-PSK
			4=16-QAM (Turbo or Viterbi + RS only)
			5=8-QAM (LDPC only) (Requires TPC/LDPC Codec and
			FAST option)
			Depending on FEC type, not all of these selections will
			be valid.
			All other codes are invalid.
			Example: RMD=2 (selects OQPSK)
Rx FEC Code	RCR=	1 byte, value	Command or Query.		RCR=	RCR?	RCR=x
Rate		of 0 thru 7	Rx FEC Code Rate, where:		RCR?		(see description of
			0=Rate 1/2		RCR*		arguments)
			1=Rate 3/4		RCR#
			2=Rate 7/8
			3=Rate 2/3 (8-PSK TCM or LDPC only)
			4=Rate 1/1 (Uncoded or No FEC)
			5=Rate 21/44 (Turbo Only)
			6=Rate 5/16	(Turbo Only)
			7=Rate 0.95	(Turbo Only)
			Depending on FEC type, not all of these selections will
			be valid.
			Example: RCR=1 (selects Rate 3/4)

16–16