Premier Mounts CDM-600 specifications Tcr= Tcr?, Tcr#, Tdr= Tdr?, Tdr#, Idr

CDM-600 Satellite Modem						Revision 7
Remote Control						MN/CDM600.IOM
Parameter	Command	Arguments		Response	Query
	(Instruction	for Command			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	or Response			Code and
				Command
	Qualifier)	to Query			Qualifier)
Tx FEC Code	TCR=	1 byte, value	Command or Query	TCR=	TCR?	TCR=x
Rate		of 0 thru 7	Tx Modulation Type, where:	TCR?		(see description of
			0=Rate 1/2	TCR*		arguments)
			1=Rate 3/4	TCR#
			2=Rate 7/8
			3=Rate 2/3 (8-PSK TCM or LDPC only)
			4=Rate 1/1 (Uncoded or No FEC)
			5=Rate 21/44 (Turbo Only)
			6=Rate 5/16 (Turbo Only)
			7=Rate 0.95 (Turbo Only)
			Depending on FEC type, not all of these selections will
			be valid.
			Example: TCR=1 (which is Rate 3/4)
Tx Data Rate	TDR=	9 bytes	Command or Query.	TDR=	TDR?	TDR=xxxxx.xxx
			Tx Data rate, in kbps, between 2.4 kbps and 20 Mbps	TDR?		(see description of
			Resolution=1 bps	TDR*		arguments)
			Example: TDR=02047.999 (which is 2047.999 kbps)	TDR#
			For Hardware Version 2.0 or higher, and Firmware 1.3.1
			or higher, additional auxiliary G.703 sub-rates are
			available. These are selected using:
			00512.AUX
			01024.AUX
			02048.AUX
			The connectors used for the Aux rates are IDI/DDO.
			These Aux rates are not available with Drop & Insert or
			IDR.

16–9