Premier Mounts CDM-600 Rvl= Rvl?, Rvl#, Rte= Rte?, Rte#, Ity= Ity?, Ity#, Rtc=, Rtc#

CDM-600 Satellite Modem							Revision 7
Remote Control							MN/CDM600.IOM
Parameter	Command	Arguments for			Response	Query
	(Instruction	Command or				(Instruction
			Description of Arguments		to		Response to Query
Type	Code and	Response to				Code and
					Command
	Qualifier)	Query				Qualifier)
Rx Audio	RVL=	4 bytes	Command or Query. (Audio/IDR Parameters)		RVL=	RVL?	RVL=aabb
Volume			Rx Audio Volume control, in the form aabb, where:		RVL?		(see description of
Control			aa=Rx 1 volume control in dB, values defined below.		RVL*		arguments)
			bb=Rx 2 volume control in dB, values defined below.		RVL#
			Valid values: -6, -4, -2, +0, +2, +4, +6, +8
			Example: RVL= -2+4 (sets Rx 1 to -2 dB and Rx 2 to +4
			dB)
Receive	RTE=	1 byte, 0 or 1	Command or Query.	(INSERT mode parameter)	RTE=	RTE?	RTE=x
Terrestrial			Receive Terrestrial Alarm Enable conditions, where:		RTE?		(see description of
Alarm Enable			0=Disables the alarm		RTE*		arguments)
			1=Enables the alarm.		RTE#
			Example: RTE=0 (selects Disable the alarm).
Insert Type	ITY=	1 byte, value	Command or Query.	(INSERT/D&I++ mode parameter)	ITY=	ITY?	ITY=x
		of 0 thru 3	Insert Type, where:		ITY?
			0=T1–D4		ITY*
			1=T1–ESF		ITY#
			2=E1–CCS
			3=E1–CAS
Rx Ternary	RTC=	1 byte, value	Command or Query.	(G.703 Parameter)	RTC=	RTC?	RTC=x
Code		of 0 thru 3	Rx Ternary Code, where:		RTC?		(see description of
			0=AMI		RTC*		arguments)
			1=B8ZS		RTC#
			2=B6ZS
			3=HDB3
			Example: RTC=1 (selects B8ZS)
Receive	RBA=	4 bytes, each	Command or Query. (IDR Parameter)		RBA=	RBA?	RBA=xxxx
Backward		a value of 0	Enable Receive backward alarm enable:		RBA?
Alarms		or 1	0=Disable		RBA*
Enable			1=External trigger Enable		RBA#
			Example: RBA=0101

16–20