Premier Mounts CDM-600 Tft= Tft?, Tft#, Off, Tmd= Tmd?, =Bpsk Tmd, =Qpsk Tmd# =Oqpsk

CDM-600 Satellite Modem	Revision 7
Remote Control	MN/CDM600.IOM

Exception: Select DROP or D&I++ mode using TFM (Transmit Framing type) which is highest priority

Parameter	Command	Arguments		Response	Query
	(Instruction	for Command			(Instruction
			Description of Arguments	to		Response to Query
Type	Code and	or Response			Code and
				Command
	Qualifier)	to Query			Qualifier)
Tx FEC Type	TFT=	1 byte, value	Command or Query.	TFT=	TFT?	TFT=x
		of 0 thru 9	Tx FEC coding type, where:	TFT?		(see description of
			0=None (uncoded, rate 1/1) with differential encoding	TFT*		arguments)
			ON	TFT#
			1=Viterbi
			2=Viterbi + Reed-Solomon
			3=Sequential
			4=Sequential + Reed-Solomon
			5=TCM (Trellis Code Modulation) (Forces TCR=3 2/3)
			6=TCM + Reed-Solomon (Forces TCR=3 2/3)
			7=Turbo (TPC)
			8=None (uncoded, rate 1/1) with differential encoding
			OFF
			9=LDPC (Requires TPC/LDPC Codec)
			Example: TFT=1 (which is Viterbi coding)
Tx	TMD=	1 byte, value	Command or Query.	TMD=	TMD?	TMD=x
Modulation		of 0 thru 5	Tx Modulation type, where:	TMD?		(see description of
Type			0=BPSK	TMD*		arguments)
			1=QPSK	TMD#
			2=OQPSK
			3=8-PSK
			4=16-QAM (Turbo or Viterbi + RS only)
			5=8-QAM (LDPC only) (Requires TPC/LDPC Codec and
			FAST option.)
			Depending on FEC type, not all of these selections will
			be valid.
			Example: TMD=2 (which is OQPSK)

16–8