Premier Mounts CDM-600 Config ALL, Config Mode, ALL = Start STOP, Start, Mode TX=RS422NONE

CDM-600 Satellite Modem	Revision 7
Front Panel Operation	MN/CDM600.IOM

6.3.1.1CONFIG: ALL

ALL = START

(STOP, START)

This menu permits the user to configure the unit, in a step-by-step process by viewing each menu in succession. Use the [←] [→] [↑] and [↓] arrow keys to select and edit the various parameters. Press ENTER to continue through all the configuration. Press CLEAR to discontinue.

6.3.1.2CONFIG: MODE

The MODE is a key parameter when configuring the modem. To simplify the menu choices, the user must first determine the INTERFACE and FRAMING type for both Transmit and Receive. Once these have been selected, the user is only presented

IMPORTANT with menu choices that are applicable to those particular modes. Examples:

•If a G.703 interface is selected, the data rate menu will be restricted to only the appropriate G.703 rates.

•If an IDR framing mode is selected, the data rate choices will be limited to only those rates specified by IESS-308.

MODE: TX=RS422:NONE RX=RS422:NONE

(NONE,IBS,IDR,INSERT,EDMAC,D&I++,ESC++)

Select TX and RX interface type and framing of the unit, using the [←] [→] [↑] [↓] arrow keys, then press ENTER.

The first parameter is the Interface type. The options are:

•RS422

•V.35

•RS232

•G703B (balanced)

•G703U (unbalanced)

•Audio (FAST option)

•LVDS

The AUDIO choice permits the user to carry 2 x 32 kbps ADPCM audio as the primary data. This mode forces IBS or EDMAC as the available framing types.

6–7