Premier Mounts CDM-600 specifications LNA State, Calibrate, Lna-Current, Window, Fault-Logic

CDM-600 Satellite Modem	Revision 7
ODU Operation	MN/CDM600.IOM

D.2.11 (ODU,ENABLE,1:1,CSAT#1,CONFIG)			LNA
(ODU,ENABLE,1:1,CSAT#2,CONFIG)			LNA
(ODU,ENABLE,STANDALONE CSAT,CONFIG)			LNA
	LNA: STATE=OFF CALIBRATE-LNA-CURRENT=NO
	CURRENT-WINDOW=48% FAULT-LOGIC=SUMMARY
	Use the [←] or [→] keys to select the parameter to edit. Use the [↑] or [↓] keys to edit
	the parameter, then press ENTER to implement, or CLEAR.
	LNA STATE	either OFF or ON - controls whether or not the CSAT will provide LNA
		Power via the Receive RF Cable.
	CALIBRATE-	Selecting YES and pressing ENTER calibrates the LNA current for use with
	LNA-CURRENT	the Current-Window function. (Default is NO)
	CURRENT	Values will scroll between 20% and 50% to define the allowable LNA
	WINDOW:	Current change before declaring a fault. Selecting 99% disables the Current
		Window function.
	FAULT-LOGIC:	either SUMMARY or NO_SUMMary. This controls whether or not a LNA
		Current-Window fault will activate the Summary Fault Relay. This allows the
		user to select whether or not to switch the Online/Offline CSAT in the event
		of a LNA Current-Window fault.

D–7