Premier Mounts CDM-600 specifications 21 ODU,ENABLE,11,CSAT#1, Reading Stored Faults Please Wait

CDM-600 Satellite Modem	Revision 7
ODU Operation	MN/CDM600.IOM

D.2.20 (ODU,ENABLE,1:1,CSAT#1, ALARMS)	STORED-ALARMS
(ODU,ENABLE,1:1,CSAT#2, ALARMS)	STORED-ALARMS

(ODU,ENABLE,STANDALONE CSAT, ALARMS) STORED-ALARMS

As the stored events are being read, the screen will show:

.....READING STORED FAULTS PLEASE WAIT

Then, the Stored Alarms screen will be shown. An example is shown below:

STORED ALARMS: CLEAR-ALL: NO (NO,YES)

IF #84: 10/14/04 12:52:08 POWER ON

Use the [←] or [→] keys to select between the log entries and the CLEAR-ALL option.

With the cursor on the entry number, use the [↑] or [↓] keys to view through the entries. Up to 99 entries are stored. Each entry shows:

the entry type: IF = information, FT = fault, OK = fault cleared the entry number – 00 though 99

the date (international format) the time

a description of the fault/information

To clear the Stored Alarms Log, select YES in the CLEAR-ALL option and press

ENTER.

D.2.21 (ODU,ENABLE,1:1,CSAT#1)			INFORMATION
(ODU,ENABLE,1:1,CSAT#2)			INFORMATION
(ODU,ENABLE,STANDALONE CSAT)			INFORMATION
	INFO: MODEL TX RX MISC	LNA

Use the [←] or [→] keys to select the type of information to view, then press ENTER.

D–11