4. Press NEXT or PREV until the following is displayed:

DISK MANAGEMENT

Save Config.

5.Press DOWN.

6.Press NEXT or PREV to cycle through the options (1±8).

NOTE: Configuration ª0º does not appear in this list. It is the default configuration and can not be altered.

NOTE: If the ªProtect Configs.º option is not enabled, the number configuration selected will be erased in order to write the current configuration. Make sure the number selected is empty or no longer required before making this selection.

7.When the desired number is displayed, press ENTER to select it.

If the configuration number has been previously saved and the ªProtect Configs.º option is enabled, the following error message is displayed briefly:

CFG FILE EXISTS

DELETE FIRST

If the configuration number has not been previously saved or the ªProtect Configs.º option is disabled, the JOB IN PROCESS light flashes and the following is displayed briefly:

STANDBY . . .

The following is displayed to indicate the configuration is being saved:

Save Config. (selected number) *

3±8

Configuring the Printer

Page 52
Image 52
Printronix L1024 manual CFG File Exists Delete First