e.Press DOWN.
f.Press NEXT or PREV to cycle through the options (1±8). When the desired number is displayed (e.g., 1), press ENTER to select it. The JOB IN PROCESS light flashes and the following is displayed briefly:
STANDBY . . .
Then, the following is displayed to indicate the configuration is being deleted:
Delete Config.
1*
5.Save the new configuration as described on page 3±7. Make sure you select the same number (e.g., Config. 1) when saving the modified configuration. The new configuration replaces the existing one.
6.Print a copy of this newest configuration and store it in a safe place. Refer to page 3±13 for details.
NOTE: If you want to make these new configuration parameters active at printer power±up, make sure you select this configuration as the ªpower±up configº (page 3±25).
3±12 | Configuring the Printer |
