Check for Interference
The printer should be used only with FCC, VDE, or CE certified computing devices. If the printer is installed within 10 feet of audio or video equipment, interference may occur. Determine if there is interference by turning the printer ON and OFF and checking the audio and video equipment for noise spikes. If interference occurs, perform the following:
1.Relocate the printer or the electronic device affected by the interference, including the antenna, if applicable.
2.Ensure that the printer and electronic device are on separate power circuits or install AC line filters.
3.Ensure that the wall outlets are properly grounded.
If these steps do not resolve the problem, refer to the Federal Communications Commission Booklet, ªHow to Identify and Resolve Radio ± TV Interference Problemsº (stock number: 004±000±00345±4), available through the U.S. Government Printing Office, Washington, D.C. 20402.
Setting Up the Printer | 2±23 |
