Long Distance Transport
1.Pack all connecting cables in a plastic bag.
2.Place the developer unit in appropriate packaging for recycling. It is not practical to move the developer unit over long distances.
3.Using a towel and a toner vacuum, remove residual toner from inside the printer.
CAUTION
Failure to secure the pressure roller for shipment can cause permanent damage to the printer.
The fuser must be cool before proceeding further.
4.Secure the fuser pressure roller (lower roller) to prevent it from bouncing during shipment. Insert the original foam pad between the fuser rollers.
NOTE: If the original foam pad is not available for use, use bubble wrap or other foam packing material to secure the lower fuser roller.
NOTE: Replacement packaging material can be procured from your authorized representative.
5.Use original packing material if available. Otherwise, use sufficient shock±absorbing packaging material.
6.Secure the top and front covers to keep them from opening.
7.At the new site, install a new developer unit and waste toner container.
Setting Up the Printer | 2±25 |
