IMPORTANT
Do not squeeze the toner bottle as you pour the toner. Doing so could cause the loose toner to be blown out of the hopper and contaminate the printer and soil hands and clothes.
If the toner bottle does not empty completely, gently tap the end of the bottle while holding it over the hopper.
4.Close the developer unit cover. Press the cover until you hear a ªclickº which indicates that the developer unit is closed completely.
5.Clean up any toner that may have spilled during this process using one of the moist towels that come with the cleaning kit inside the developer kit.
NOTE: Some software stops communicating with the printer if the printer is off line for more than two minutes. In this case, you may need to restart your print job.
Developer Unit Cover (shown in the open position)
Starter Toner Bottle (with spout attached)
Figure 2±6. Filling the Toner Cartridge
2±12 | Setting Up the Printer |
