Install the OPC Drum Unit

CAUTION

The OPC drum unit is light sensitive. Install it within five minutes. When removing the drum unit from the foil bag, do not touch the surface of the drum unit. Fingerprints and scratches can damage the drum surface and cause poor print quality. Do not rotate the drum unit manually. Forced rotation will cause an incorrect count for the life of the drum unit and may cause poor print quality.

Refer to Figure 2±10 and perform these steps:

1. Remove the OPC drum unit from its foil bag.

NOTE: Save the foil bag and insert the OPC drum unit into the bag whenever the printer cover is open for more than five minutes.

2.Insert the drum unit behind the developer unit. The OPC drum unit will slide into place easily.

NOTE: The drum unit does not lock into place; it rests behind the developer unit.

3. Close the printer cover.

OPC Drum Unit

Figure 2±10. Installing the OPC Drum Unit

Setting Up the Printer

2±17

Page 35
Image 35
Printronix L1024 manual Install the OPC Drum Unit, ±10. Installing the OPC Drum Unit