Maximum Cache Size
This option is used to specify the maximum number of characters that can be stored in the font cache.
The allowable range is 50 to 900 characters, in 50±character increments. The default value for this parameter is 900 characters.
Maximum Cached Characters
This option is used to specify the size of the largest character that can be stored in the font cache. To calculate the memory requirement, use this equation:
horizontal | x | vertical | x | character | x | character |
resolution | resolution | height (inches) | width (inches) | |||
|
|
|
| 8 |
|
|
For example, if an application requires the use of a character that is 1 inch high by 1 inch wide, calculate the Maximum Cached Characters value as follows:
300 x 300 x 1 x 1 = 11,250
8
Therefore, select a value that is equal to or greater than 11,250. The closest available value is 12 KBytes.
The allowable range is 1 KBytes to 20 KBytes, in 1±KByte increments. The default value for this parameter is 1 KBytes.
Maximum Fonts Loaded
This option is used to specify the number of scalable font outlines that can be concurrently loaded into RAM in the printer.
The allowable range is 1 to 20 fonts, in 1±font increments. The default value for this parameter is 5 fonts.
3±46 | Configuring the Printer |
