1–6 Introduction
Emulations
The printer comes with HPr Laserjet PCL5r, IPDS, or the Printronix
LinePrinter Plust emulation. The LinePrinter Plus emulation includes the
following printer protocols:
•Printronix P–Series
•Printronix P–Series XQ
•Serial Matrix
•Proprinter III XL
•Epson FX–1050
LinePrinter Plus emulation provides portrait and landscape image orientation.
Automatic 1–up, 2–up, 4–up, and gray bar overprinting are also provided. The
emulation offers proportional (scalable) fonts and multi–up form definition
capability as well.
Optional emulations are also available on diskette. Refer to Appendix A for a list
of optional emulations. Refer to the Programmer’s Reference Manual or
Operator’s Guide supplied with each emulation diskette for specific information.
Hardware Options
Ask your printer representative about these options which can enhance your
printer’s versatility:
•Paper stacker with printer stand
The paper stacker provides for properly stacked paper from the beginning to
completion of the print job. The stacker will hold an entire box of media.
•Memory expansion (4 meg and 16 meg increments)
The L1024 has 8 meg of memory factory installed. Memory expansion modules
are available in increments of either 4 or 16 meg. Using these modules, printer
memory can be expanded to 40 meg.
•Second Floppy Disk Drive
A second floppy disk drive can be installed, as disk drive B.