A Specifications

Original Manufacturer Supplies

Consumables design, specification, and selection are critical and integral to the development of any computer printer imaging system.

For the name of your nearest full service distributor, please call:

United States

(800) 733±1900

Europe

(31)

2464±90111

Singapore

(65)

449±7555

The yield of the supplies is based on a 5% page coverage using 20 lb bond paper. In a typical business letter, for example, text covers about 5% of the page using 20 lb bond paper. However, applications that print more densely, such as graphics and bar codes, will use up the consumables at a faster rate.

In addition, the type of media used will determine the yield of the consumables. Optimum print quality and consumable life is obtained by using bond media rated between 18 and 20 pounds. Label stock and heavier media can also be used, but the print quality and consumable life, as well as the life of the fuser, may be reduced.

Toner Kit (704539±006):

Cleaner Felt (2 per kit)

Toner Bottle (2 per kit)

Waste Toner Container

8,000 pages (see note below)

8,000 pages (at 5% page coverage)

8,000 pages

NOTE: Normally, the fuser cleaner felt should be replaced every 8,000 pages. However, to ensure optimum print quality, you may want to replace it more often (e.g., every 6,000 pages). Call the number shown above to order additional cleaner felts. They are available in 10±packs only. The part number for the 10±pack is 704539±011.

Specifications

A±1

Page 99
Image 99
Printronix L1024 manual Specifications, Original Manufacturer Supplies