Setting up the Audio
Options
You can connect the DVD Recorder to an external amp or Home Theatre.
Allow you to setup the Audio device and sound status depending on the audio system in use.
4 Press the …† buttons to select the desired audio option, then press the OK or √ button.
| Audio | ||
No Disc |
|
|
|
Programme | Digital Output | PCM |
|
Setup | DTS | Bitstream |
|
| Dynamic Compression : On | √ | |
| NICAM | : On | √ |
MOVE | OK | RETURN | EXIT |
System Setup
1 With the DVD Recorder in Stop mode/No
Disc mode, press the MENU button.
Programme |
No Disc
Programme Scheduled Record List√
Setup
MOVE | OK | RETURN | EXIT |
5 Press the …† buttons to select the desired item, then press the OK or √ button.
■Press the RETURN or œ button to return to the previous menu.
NOTE
Press the MENU button to exit the menu.
2 Press the …† buttons to select Setup, then press the OK or √ button.
| Setup | ||
No Disc |
|
|
|
Programme | System |
| √ |
Setup | Clock Set |
| √ |
| Language |
| √ |
| Audio |
| √ |
| Video |
| √ |
| Parental Control | √ | |
| Install |
| √ |
MOVE | OK | RETURN | EXIT |
3 Press the …† buttons to select Audio, then press the OK or √ button.
Audio setup menu will be displayed.
Digital Output
1.PCM : Select this when you have no equipment that can decode Dolby Digital (or
2.Bitstream : Output Dolby Digital (or
■ Digital output setting is equally applied to
| Audio | ||
No Disc |
|
|
|
Programme | Digital Output | : PCM | √ |
Setup | DTS | : Off | √ |
NOTE
both Dolby Digital and
| Dynamic Compression : On | √ | |
| NICAM | : On | √ |
MOVE | OK | RETURN | EXIT |
■Be sure to select the correct Digital Output or you will hear no sound or loud noise.
DTS
1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV amplifier does not have DTS decoder.
2.On : Outputs DTS Bitstream via digital output when you play DTS track.
Select this only when your AV receiver (or AV amplifier) have DTS decoder.
■ When DTS soundtrack is played, sound
NOTE | does not output from AV Audio Output. |
30- English