Samsung DVD-R135/XSG, DVD-R135/HAC, DVD-R135/UMG manual Copying from a Camcorder

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

Before you start

Check that the disc has enough available space for the recording. Adjust the recording mode.

1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray.

5 To play the camcorder and find the starting point to be copied, select the play icon( ) on the top of the screen using the œ √ buttons and then press the OK button.

6 To start recording, select the record icon( ) on the top of the screen using the œ √ buttons and then press the OK button.

You can also use the REC button on the remote control to start recording. (If your camcorder is in stop mode, the REC button doesn't work.)

To stop recording

Press the STOP button to stop a recording in progress.

●When using DVD-RW/DVD-R discs, the message ‘Updating the disc information. Please wait for a moment.’ is displayed

2 Press the OPEN/CLOSE button to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 37.)

3 Press the REC MODE button repeatedly, (or Press the REC MODE button, then press the …† button) to select the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

Record Mode SP (02:12)

4 Press the INPUT SEL. button to select DV. If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.

DV

The DV device is connected.

MOVE OK RETURN

NOTE

■ You can not change the recording mode and input source while recording.

■Recording will stop automatically if there is no free space left for recording.

■Up to 99 titles can be recorded onto a disc.

■Recording will stop automatically if a copy protected image is selected.

■DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted.

■Do not use DVD-R authoring discs with this DVD Recorder.

■If you connect a camcorder using DV Jack, the related control menu appears automatically. To access on the screen controls during recording, press the œ or √ button.

Recording

English -41