Remote Control

The remote control doesn't work.

Other problems.

Checkpoint 1 Point the remote control at the remote control sensor on your DVD recorder. Allow for proper distance. Remove obstacles between your DVD recorder and the remote control.

Checkpoint 2 Check whether the batteries are empty.

Checkpoint 3 Check for the TV or DVD button.

Checkpoint 1

Checkpoint 2

Checkpoint 3

Read the table of contents and then find and read the section describing your problem, follow the instructions given.

Turn your DVD recorder off and on.

If the problem still persists, contact a nearby Samsung service centre.

Other

I forgot my password for parental supervision.

Checkpoint 1

Press and hold down the PROG ( ) buttons on the front panel of the

DVD Recorder simultaneously for more than 5 seconds with no disc in the DVD Recorder. All settings including the password will revert to the factory set- tings. Do not use this unless absolutely necessary. (Note that this function is possible only when no disc is inserted.)

Is it possible to change a subtitle and an audio signal on a recorded disc?

Checkpoint 1

A recorded disc is played with only the subtitle and the audio signal which were selected during recording.

Information dditionalA

English -87