Samsung SF-3100 Chapter, Option, Suboption, Special Features, Drpd Mode, Distinctive Ring, Error

	Special Features
Option	Suboption
DRPD MODE	‘Distinctive Ring’ is a telephone company service which enables a user to
(Distinctive Ring	use a single telephone line to answer several different telephone numbers.
Pattern	The particular number someone uses to call you on is identified by different
Detection)	ringing patterns, which consist of various combinations of long and short
	ringing sounds. This feature is often used by answering services who
	answer telephones for many different clients and need to know which
	number someone is calling in on to properly answer the phone.
	Using the DRPD feature, your fax machine can ‘learn’ the ring pattern you
	designate to be answered by the FAX machine. Unless you change it, this
	ringing pattern will continue to be recognized and answered as a FAX call,
	and all other ringing patterns will be recognized as a normal phone call.
	You can easily suspend or change DRPD at any time.
	Before using the DRPD option, Distinctive Ring service must be installed
	on your telephone line by the telephone company. To set up DRPD, you
	will need another telephone line at your location, or someone available to
	dial your FAX number from outside.
	Choose ‘SET’ to setup the Ring Pattern Detection. The LCD displays
	‘WAITING RING’. Call your fax number from another telephone. It is not
	necessary to place the call from a fax machine. When your machine begins
	to ring, do not answer the call. The machine requires several rings to learn
	the pattern.When the machine completes ‘learning’, the LCD displays
	‘END DRPD [SETUP]’.
	Choose ON to Activate DRPD. With the DRPD feature active, ‘DRPD
	MODE’ and the date and time appears in the display and the previously set
	reception mode is ignored.
	Choose OFF to cancel DRPD if it is currently active. All calls will be
	answered normally, depending on Rcv. Mode setting.
	Note:
	DRPD must be set up again if you re-assign your fax number, or connect
	the machine to another telephone line. After DRPD has been set up, call
	your fax number again to verify that the machine answers with a fax tone,
	then have a call placed to a different number assigned to that same line to be
	sure the machine answers the normal phone call.
ECM MODE	This mode compensates for poor line quality and ensures accurate, error-
(Error	free transmission with any other ECM-equipped facsimile machine. If the
Correction Mode)	line quality is poor, transmission time may be increased when ECM is
	enabled.
	Choose ON to turn Error Correction Mode on.
	Choose OFF to turn Error Correction Mode off.
PRINT	You can select desirable print quality.
QUALITY	Choose ‘LQ’ to print high quality but low speed.
	Choose ‘DRAFT’ to print low quality but high speed.
INK SAVE	You can save ink when making a copy or receiving a fax with this feature.
	Choose OFF to turn off this feature.
	Choose MED to use 25% less ink.
	Choose MAX to use 50% less ink.

Chapter 6

6-9