Automatic Dialling

One-Touch Dialling

One-Touch dialling provides you with quick access to your most frequently used numbers. Before using One-Touch dial, you must first store a number into any of five One-Touch buttons located on the left of the machine’s Control Panel.

Storing a Number for One-Touch Dial- ling

1 Press and hold a One-Touch button for about two seconds.

If a number is already assigned to the button, the dis- play briefly shows the number, then asks if you want to delete.

If you select ‘N (No)’ and press Start/Enter, the machine returns to Standby Mode with the old num- ber untouched.

To delete old number, select ‘Y (Yes)’, press Start/ Enter and start over.

2 Enter the number you want to store (up to 46 digits).

If you want a pause between numbers, press Redial/ Pause; a ‘P’ appears in the display.

If you make a mistake while entering a number, use or to move the cursor under the digit, then enter the correct digit.

3 Press Start/Enter when the number appears correctly in the display.

The display asks you to enter a name.

4 Press Start/Enter to enter name.

2-2

Page 22
Image 22
Samsung SF-3100 manual One-Touch Dialling, Storing a Number for One-Touch Dial- ling, Press Start/Enter to enter name