Message Paging

The Answering Machine

When you’re out of the office or home and you want to be notified whenever there’s new message left on your machine, you need to use the Message Paging feature supplied with your machine. In TAM Mode, you can set your machine to transfer incoming calls to another number. In order to use the Message Paging feature, you must set the Message Paging option to ON. See “User Options” on page 6-7.

Message Paging operates as follows:

When a call comes in and the caller leaves a mes- sage, your machine automatically dials the tele- phone number you have specified when setting Message Paging.

When someone (maybe you) answers the call, your machine sends out beeps, for up to 55 seconds, and waits for the Remote Password to be entered. To learn about Remote Password, see “TAM Options (SF-3100T only)” on page 6-11. If you have entered a correct password while your machine sends out beeps, the machine plays the newly recorded mes- sages.

When the playback is complete, you hear a short beep. You can then enter Remote Command at this point to perform necessary operation. To learn about Remote Commands, see “Using Remote Com- mands” on page 4-9.

If there is no key input or the wrong password is entered while the machine sends out beeps, and the line will be disconnected.

Chapter 4

4-7

Page 47
Image 47
Samsung SF-3100 manual Message Paging operates as follows