Option Settings
Setting 6: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension phone connected to the same line as the fax, you can make the fax begin reception by pressing 5, *, and *on the phone. Use this setting if you want to use a number other than 5 to begin fax reception. You can enter any number from 0 to 9.
∙Initial setting: 5
FUNCTION
until
4 
Press display TEL/FAX REMOTE # shows:
Enter a number from 0 to 9
REMOTE RECEPTION
STOP
Setting 7: REMOTE RECEPTION SELECT
If you don’t intend to use the above TEL/FAX REMOTE NUMBER, you can turn detection of the number off. This will ensure that the fax never mistakenly attempts to begin reception if it detects a signal similar to the TEL/FAX REMOTE NUMBER while you are talking on an extension phone. Press 1 to turn detection on, or 2 to turn detection off.
∙Initial setting: 1
FUNCTION
4 
Press
YES NO
1 or 2
until
display REMOTE RECEPTION shows:
STOP
TRANSACTION LIST
Setting 8: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from 1 to 5 as follows:
1 (ALWAYS PRINT): A report will be printed after each transmission, reception, or error.
2 (ERR/TIMER/MEM): A report will be printed after an error, timer operation, or memory operation.
3 (SEND ONLY):
4 (NEVER PRINT):
5 (ERROR ONLY):
∙Initial setting: 3
FUNCTION
4
Enter a number from 1 to 5
A report will be printed only after a transmission.
A report will never be printed.
A report will be printed only after an error occurs.
until
Press display TRANSACTION LIST shows:
STOP
DIAL MODE
