Sharp UX-470 operation manual Setting 11 PBX Recall, Setting 12 FAX Signal Receive, 118

Option Settings

Setting 11: PBX RECALL

This sets the recall mode used for transferring calls on a PBX or utilising BT Network services. Refer to your PBX manual or consult your supplier for the correct setting if the factory setting is inappropriate. Enter 1 for earth recall, 2 for time break recall, or 3 for no operation.

1:	Earth
2:	Time break recall
3:	No operation

∙Initial setting: 2

FUNCTION

until

4 Press display PBX RECALL shows:

Enter a number from 1 to 3

FAX SIGNAL RX

STOP

Setting 12: FAX SIGNAL RECEIVE

Your fax will automatically begin reception if you hear a high-pitched fax tone after answering a call. If you use a computer fax modem on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents sent from the computer fax modem. Press 1 to turn the function on, or 2 to turn it off.

∙Initial setting: 1

FUNCTION	Press	until
4		display FAX SIGNAL RX
		shows:

YES	NO	STOP
1	or 2	JUNK # CHECK

118