10: Installation on Handheld and Pocket PCs
•System Requirements
•Software Installation Procedures
•Card Insertion and Removal
•Account Configuration Procedures
This chapter guides you through the steps necessary to making the AirCard wireless network card operational on a Handheld or Pocket PC. This requires that you install the AirCard software and activate and configure your account (unless the AirCard is
Since software cannot be installed directly to a Handheld/ Pocket PC, you require a desktop or notebook computer to function as a “host”. The installation, activation, and configu- ration process has these steps:
1.Install the software to the host.
2.Connect the Handheld/Pocket PC to the host and download the software from the host to the Handheld/ Pocket PC. (You can connect the Handheld/Pocket PC to the host before or after you install the software to the host.)
3.If the AirCard has not been
Before you begin the installation, ensure you have the necessary hardware, software, and system resources described in the next section.
System Requirements
On Pocket PCs, your operating system must be:
•Windows CE 3.0 MS Pocket PC, or
•Windows CE 3.0 Pocket PC 2002
If you do not know what version of Windows CE you are using select Start > Settings, tap the System tab, and tap the About icon. If the second line on the screen reads, “Windows 3.0.9348 (Build…)”, your operating system is Windows CE 3.0 MS Pocket PC. If the second line reads, “Windows 3.0.11171 (Build…)”, your operating system is Windows CE 3.0 Pocket PC 2002.
Your Pocket PC must have:
Installation and Use on Handheld/Pocket PCs
|
|
|
|
|
|
|
Rev 3.3 May.02 |
|
|
|
|
| 117 |
|
|
|
