AirCard 555 Network Card User Guide
Table 3-1: System Resource Requirements
I/O Resources | 1 IRQ, 40 bytes I/O Space |
|
|
Memory | 32 MB |
|
|
Disk Space | 7 MB |
|
|
AirCard Software Installation
Procedures
This section provides detailed installation instructions. Proceed to the heading that corresponds to your operating system.
Windows 95 Pre-Installation Procedures
Note: Windows system files may be required to complete installation of the AirCard 555 driver. These files are located on the Windows CD and may be stored on your hard drive in CAB files. Ensure you have your Windows CD, or know the location of the .CAB files before proceeding.
Depending on how Windows 95 was installed on your PC and what devices have since been installed, your PC Card (PCMCIA) slots may or may not have been enabled and the TCP/IP stack may or may not be installed. Since the AirCard requires these, this section guides you through these steps:
1.Verifying that the PC Card slots are enabled
2.Verifying that TCP/IP is installed
Verifying That the PC Card Slots Are Enabled
1.Open the Control Panel by selecting Start > Settings > Control Panel.
2.Double click the PC Card icon.
3.If the PC Card (PCMCIA) Properties window is displayed, the slots are enabled and you can proceed to the section “Verifying That TCP/IP Is Installed”.
4.If the PC Card (PCMCIA) Wizard is displayed, the slots are not yet enabled, and the wizard guides you through the enabling process. (Generally it is sufficient to click Next at each window.) Click Finish on the final window and click Yes when prompted to restart the PC.
|
|
|
|
|
|
|
24 |
|
|
|
|
| 2130142 |
|
|
|
