Note: Watcher begins timing outgoing calls from the time the call is
Chapter 11: The Watcher Window and Indicators
Table 11-1: Connection Status Area Icons
Icon | Meaning |
|
|
When the In Use indicator is a modem labelled “1X”, an Express Network data call is in progress. (For a description of Express Network data calls, see page 134.)
When the In Use indicator is a large “X”, an error has occurred and the AirCard is inoperable. (This may be resolved by closing Watcher and turning your PC off and on.)
Call Status Box
The Call Status Box displays one of these messages:
•Ready to Connect indicates that you have a network connection but there is no call in progress.
•Dialing indicates that the AirCard is attempting to connect to a phone number.
•Time … the name of the person with whom you are connected (or “Unknown” if the name is not obtainable), and the phone number indicates that a voice call is in progress. The time shown is the duration of the call.
•Time…Rx…Tx… indicates that a data call is in progress. The time shown is the duration of the call. Rx shows the number of bytes of data received. Tx shows the number of bytes of data transmitted.
•Voice call from… indicates that an incoming voice call is in progress.
•Roam Call From … indicates that an incoming voice call is in progress and you are roaming.
•Data Call From … indicates that an incoming data call is in progress.
•Fax Call From … indicates that an incoming fax call is in progress.
•… New Missed Call(s) indicates that you received a call (or calls) that you failed to answer. (Depending on your settings in the Options window, a record of these calls is maintained in the call log which is described on page 68.)
Installation and Use on Handheld/Pocket PCs
|
|
|
|
|
|
|
Rev 3.3 May.02 |
|
|
|
|
| 127 |
|
|
|
