AirCard 555 Network Card User Guide
Installing the Modem Driver
1.In the Control Panel, double click the Modem icon to open the Modem Properties window.
2.Click the Add button to open the Install New Modem wizard.
3.Select Don’t detect my modem, I will select it from a list and click Next.
4.Select the Have Disk button.
5.Enter d:\Drivers\WinNT\mdmac555 where d is the drive letter for your
6.Click OK.
7.Verify that Sierra Wireless AirCard 555 Modem is displayed and click Next.
8.Select the Selected Ports radio button and select the same communications port you selected when you installed the network card driver. Click Next.
9.Click Finish.
10.If you are prompted that
11.Click Add in the Remote Access Setup window.
12.Select the AirCard 555 listing under RAS Capable Devices and click OK.
13.If you are prompted to restart your PC, click Yes. Otherwise restart your PC from the Start menu.
14.When the PC restarts,
On completion of this step, the modem driver is installed. Verify that Remote Access Service is installed before proceeding to install the Venturi software.
Verifying that RAS is Installed:
1.In the Control Panel, double click the Network icon to open the Network window.
2.Click the Services tab.
3.If Remote Access Service is listed under Network Services, the component is installed and you can skip to the next section. Otherwise, proceed to step 4.
4.Click to select Computer Browser.
5.Click the Add…button to open the Select Network Service.
6.Select Remote Access Service and click OK.
7.If the Windows NT Setup window appears, either insert the Windows NT CD and enter your
|
|
|
|
|
|
|
32 |
|
|
|
|
| 2130142 |
|
|
|
