AirCard 555 Network Card User Guide
Note: Use the Windows NT Diagnostics window to locate an available IRQ and I/O space. Make note of the Com Port that you use to install the network card driver. You must enter the same Com Port when installing the modem driver.
Installing the Network Card Driver When Networking Has Not Been Installed:
1.Click Yes at the prompt, “Do you want to install it now?” to launch the wizard that installs Networking.
2.Click the check boxes on the first window of the wizard so that Wired to the network: is checked and Remote access to the network: is NOT checked. Click Next to proceed.
3.Click the Select from list... button to open the Select Network Adapter window.
4.Click the Have Disk... button to open the Insert Disk window.
5.If you have copied the driver from the AirCard installation CD to your hard drive, enter the path to the driver and click OK to open the Select OEM Option window.
6.If you are installing the driver from the AirCard instal- lation CD, enter d:\Drivers\WinNT where d is the drive letter for your
7.If Sierra Wireless AirCard 555 is highlighted, click OK. The Sierra Wireless AirCard 555 should appear in the Network Setup Wizard under Network Adapters. Otherwise click Cancel and repeat the previous two steps.
8.Click Next to display a list of network protocols.
9.Ensure TCP/IP Protocol is checked (as well as any other protocols appropriate to your network configuration) and click Next to display a list of network services.
10.Select the services appropriate to your network configu- ration and click Next. (For the purpose of installing the AirCard 555, it does not matter what selections you make in this window.)
11.Click Next.
12.If the Windows NT Setup window appears, system files are required to install the components you checked. Either insert the Windows NT CD and enter your
13.Use the drop down menus to select an I/O Port, Interrupt, Memory, and Com Port, noting that the AirCard 555 requires 1 IRQ and 40 bytes of I/O Space. Click Continue.
14.If the Windows NT Setup window appears again, enter the path to your
15.Click Yes at the DHCP prompt to proceed to a display of network bindings. (DHCP or Dynamic Host Configuration Protocol is required by the AirCard 555 regardless of your network configuration.)
|
|
|
|
|
|
|
30 |
|
|
|
|
| 2130142 |
|
|
|
