
Chapter 14: The Watcher Menu Options
3.Enter a name for the connection and complete the remaining fields noting the following:
·If the phone number must be preceded with an area code, tap the Use area code check box and enter the area code. Tap the Use 1 check box if the phone number must be prefixed with a 1.
·Enter a user name if it is required. If you want to store a password so that it is not necessary to enter it each time you connect, tap the Save password check box and enter your password.
4.Tap Save (Pocket PCs) or OK (Handheld PCs) to close the window and save the information you entered, or Cancel (Pocket PCs) or the close button (Handheld PCs) to close the window without saving.
To change an existing record in the Dial-Up Manager window:
1.Tap the connection to select it and tap the Properties… button to open the Connection Properties window.
2.Enter the new information in the appropriate fields. (The Connection Name cannot be changed.)
3.Tap Save (Pocket PCs) or OK (Handheld PCs) to close the window and save the information you entered, or Cancel (Pocket PCs) or the close button (Handheld PCs) to close the window without saving.
To delete a record in the
1.Tap the connection to select it and tap the Delete button.
2.When prompted to confirm the deletion, tap Yes.
To connect to a number in the
1.Tap the connection to select it and tap the Connect button.
The AirCard then attempts a connection to the phone number you selected.
Installation and Use on Handheld/Pocket PCs
|
|
|
|
|
|
|
Rev 3.3 May.02 |
|
|
|
|
| 155 |
|
|
|