
Note: If you also use the AirCard 300 and a
Note: On Pocket PCs, anytime you eject and
Note: See Chapter 2 “Getting Started” for an overview of account activation and configu- ration.
Chapter 10: Installation on Handheld/Pocket PCs
3.With the label facing towards the front of the Pocket PC, insert the network card into the slot at the top of the jacket.
To insert the AirCard 555 into a Handheld PC:
1.Attach the antenna to the circular copper connector on the end of the AirCard. DO NOT FORCE.
2.With the label facing towards the top of the Handheld PC, insert the network card into the slot.
The AirCard is powered as soon as you insert it.
Removing the AirCard | andInstallationUseon | Handheld/PocketPCs | |
To remove the AirCard: | |||
|
| ||
1. Use the ejector to release the AirCard and remove it from |
|
| |
the slot. |
|
|
Account Configuration
Procedures
The final step to making the AirCard operational is config- uring it to use your account.
If you purchased a
Otherwise, you must use the Activation Wizard to activate and configure your account. Future releases of the AirCard software will allow for Manual Activation and
If you have not yet selected a service provider, refer to the Sierra Wireless web site, (www.sierrawireless.com) for a listing of service providers.
To activate an account and configure your AirCard:
1.Insert the AirCard into your PC Card slot, if it is not already inserted.
|
|
|
|
|
|
|
Rev 3.3 May.02 |
|
|
|
|
| 121 |
|
|
|