USB Control settings
Thismenu allows you to associate a video source with a USB receptacleon the ECP.
Submenu setting Description
USB1Source Enablest ouchf orthe selected video source (VGA-1,VGA-2,HDMI
orDisabled) by associating the video sourcew ith the roomcomputer
USB receptacle(USB1) on the ECP.
USB2Source Enablest ouchf orthe selected video source (VGA-1,VGA-2,HDMI
orDisabled) by associating the video sourcew ith the laptopUS B
receptacle(USB2) on the ECP.
Networksettings
Thismenu allows you to use or not use Dynamic Host ControlProtocol (DHCP) and to set t he
network-relatedaddressesand nameswhen DHC P is not used.
Submenu setting Description
DHCP Determinesif the projector’s IPaddressand other network settings
aredynamically assignedby a DHCPserver ormanually set.
lOnallows the network’s D HCP server to assign a dynamic IP
addressto the projector.
lOffallows you to manually set the projector’s IP address and
othernetwork settings.
IP Address Displaysor allows you tos ett heprojector’s IP addressin values
between0.0.0.0 and255.255.255.255.
SubnetMask Displaysor allows you to set t heprojector’s subnet mask numberin
valuesbetween 0.0.0.0 and255.255.255.255.
Gateway Displaysor allows you to set t heprojector’s default network gateway
invalues between 0.0.0.0 and255.255.255.255.
DNS Displaysor allows you to set t heprojector’s IP address for your
network’sprimary domainname server in values between0.0.0.0 and
255.255.255.255.
GroupName Displays orallows you to set the projector’s workgroupname
(maximum12 characters).
ProjectorName Displays or allows you to set the projector’s name (maximum12
characters).
Location Displays or allows you to set the projector’s location (maximum16
characters).
Contact Displays or allows you to set t hec ontact nameor numberf orprojector
support(maximum 16characters).
SNMP Turnsthe Simple Network ManagementProtocol (SNMP) agenton or
off.
AP P E N D I X A
Remotelymanaging your system throug h a networ k interface
66