Command Command target range Response
setemergencyalertmsg
[description]
Entera descriptor nomore
than60 characters long.
emergencyalertmsg=[description]
setemergencyalert [target] =on
=off
emergencyalert=[target]
Thesecommands controlt hec urrentsyst ems ettings. These commandsare availablew henthe
projectoris in Standbymode andwhen it is on.
Command Commandtarget range Response
setrestoredefaults [none] restoredefaults=done
setlamphrs [target] = 0 lamphrs=0
setv gaoutnetenable[target] =on
=off
vgaoutnetenable=[target]
setusb1source [target] =vga1
=vga2
=hdmi
=disabled
usb1source=[target]
setusb2source [target] =vga1
=vga2
=hdmi
=disabled
usb1source=[target]
NN O T E
TheNetwork and VGAOut setting’s f eaturesare off by default. Select on to activ atet hese
features.
AP P E N D I X B
Remotelymanaging your system throu gh an RS- 232 serial interface
84