Networkcontrols
Thesecommands controly ourprojector’s network status and settings. These settings are locatedin
theOSD, andare availableeven when the projectoris in Standby mode.You must locally set the
networkand VGA out commands to on fort henetwork abilities to w ork.
Thesecommands informy ouof thec urrentnetwork settings.
Command Response
getnetstatus netstatus=connected
netstatus=disconnected
netstatus=disabled
getdhcp dhcp=[currentDHCP status]
getipaddr ipaddr=[currentIP address]
getsubnetmask subnetmask=[currentsubnetmask number]
getgateway gateway=[currentnetwork gateway]
getprimarydns primarydns=[currentprimary domainserver]
getmacaddr macaddr=[currentMAC address]
Thesecommands controly ournetwork settings.
Command Commandtarget range Response
setdhcp [t arget] =on
=off
dhcp=[current]
setipaddr [target] =0.0.0.0t o =255.255.255.255 ipaddr=[current]
sets ubnetmask[t arget] =0.0.0.0 to = 255.255.255.255 subnetmask=[current]
setgateway [t arget] = 0.0.0.0t o =255.255.255.255 gateway=[current]
setprimarydns [target] = 0.0.0.0t o =255.255.255.255 primarydns=[current]
AP P E N D I X B
Remotelymanaging your system throu gh an RS- 232 serial interface
80