Trouble check

Symptom

Cause and/or Corrective Action

Recording stops in a few seconds. • The START/STOP MODE switch is set to 5SEC or .

 

 

mSet it to . (p. 18)

 

 

 

 

The cassette cannot be removed

• The battery is dead.

from the holder.

mUse a charged battery pack or the AC power adaptor. (p. 8, 32)

{and 6indicators flash and no

• Moisture condensation has occurred.

function except for cassette

mRemove the cassette and leave the camcorder for at least 1

ejection works.

hour. (p. 98)

 

 

 

The date or time indicator is

• You pressed DATE and TIME together for more than 2 seconds.

flashing.

mThe camcorder is not malfunctioning. You may start

 

 

recording. Flashing will stop soon.

 

 

• The lithium battery is weak or dead.

 

 

mReplace the lithium battery with a new one. (p. 88)

 

The tape does not move when a

• The POWER switch is set to CAMERA or OFF.

video control button is pressed.

mSet it to VTR.

 

 

• The tape has run out.

mRewind the tape or use a new one. (p. 26)

The Steady Shot function does not • STEADY SHOT is set to OFF.

activate.

mSet STEADY SHOT to ON. (p. 62)

 

• The Steady Shot function does not work when the wide mode is

 

set to 16:9 FULL.

The autofocusing function does

• FOCUS is set to MANUAL.

not work.

mSet it to AUTO. (p. 57)

 

• Shooting conditions are not suitable for autofocus.

mSet FOCUS to MANUAL to focus manually. (p. 57) The fader function does not work. • The START/STOP MODE switch is set to 5SEC or .

mSet it to . (p. 18)

A title is displayed.

mStop superimposing the title. (p. 63)

No sound or only a low sound is

• The stereo tape is played back with HiFi SOUND set to 1 or 2 in

heard when playing back a tape.

the menu system.

 

 

mSet to STEREO in the menu system. (p. 38)

Excessive high-pitched sound is

• The picture has been recorded with WIND set to ON in the menu

heard.

system.

 

 

mWhen there is no wind, set it to OFF. (p. 36)

 

 

 

Data code becomes “--:--:--”.

• You are playing back a portion of tape on which you wrote or

(CCD-TRV94E only)

erased the index signal. This is not a malfunction. (p. 78)

 

 

The date or time indicator

• Reset the date and time. (p. 90)

disappears.

 

 

 

 

Picture

Symptom

Cause and/or Corrective Action

The image on the viewfinder screen is not clear.

The viewfinder lens is not adjusted. mAdjust the viewfinder lens. (p. 14)

106